Stage winner Viking Tour 2014
is empty
<< previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 
21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 
next >>


December 19th, 2016To the top
WinterbreakThe M5 showroom will be closed until January the 27 th. Telephone and e-mail traffic will be continued as much as possible

New sponsorship between 2-SPOKE and multiple Dutch Time Trial Champion Remco Grasman.

December 5th, 2016To the top
New sponsorship between 2-SPOKE and multiple Dutch Time Trial Champion Remco Grasman.Last week Bram Moens officially presented the new 2-SPOKE wheel set to multiple Dutch time trial champion Remco Grasman. Remco is a renowned cyclist who delivers as much as 375 watts of continuous endurance! In direct competition with professional riders Remco repeatedly left pros behind.... That's one of the reasons to support him as a elite rider without a contract!

Remco will use these fastest wheels in the world in the coming 2017 competition.

M5's Bram Moens receives Award for Designer of the year handed out by magazine "Constructeur" 2016

November 30th, 2016To the top
M5's Bram Moens receives Award for Designer of the year handed out by magazine During the Engineers day in Evoluon (Eindhoven, the Netherlands) Bram Moens received the Award for Designer of the year 2016. On behalf of the monthly magazine "Constructeur" Robin Zander handed over the award as token of appreciation of M5's recent innovations like the carbon handbike of Paralympic champion Jetze Plat, the 2-SPOKE wheel (gold and silver medals) en the new, iconic citybike MINIMAL.BIKE.

The engineers day is an annual event filled with inspiration and leading speakers, designers, research & development teams, etc. is here!

November 17th, 2016To the top

This time not a recumbent, but certainly an attractive project! is here!To keep the mind clear it's necessary to do something outside the daily proceedings. In this particular case it's still about bicycles, but this time you're going in an upright position against the wind.
The last two years have been pretty busy with this full carbon project on top of the (not really) daily routine plus the 2-SPOKE plus the Carbon Handbike project. But this project started at the M5 counter in October 2014 during a visit of Aart Roelandt (senior industrial designer offering a wide range of products). I've been asking him for years to come up with a nice idea or product which could be manufactured in carbon. His proposal was: devise, draw, make a lightweight carbon citybike. There are definitely reasonably well, or simply well, handling compact (folding) bikes that are good looking, but each of them have their own characteristics and flaws:

  • too heavy
  • wheels too small
  • inefficient riding
  • non ideal geometry
  • or just plain ugly

After several sketches, soon a basic shape was determined and subsequently 1:1 AutoCad drawings, cardboard shapes and real wooden 1:1 models were made. It is imperative to actually feel the frame in your hands instead of only seeing it on a screen as a flattened 3-D model, particularly because the frame will be manufactured in expensive steel moulds.
Apart from the frame and the front fork I also made several wooden handlebars with air-foil shape, which resulted in two carbon production versions. One with integrated handlebars and thumb notches and the other with cylindrical carbon tube ends which allow assembly of standard shifters and brake levers.

One of the main goals was to adjoin all parts as much as possible. So, no carbon frame from the year 2100 with an old fashioned pre-1900 looking (aluminium or steel!) saddle or handlebar stem just because these are available readily. Seen plenty of those. Also no ugly clamps around saddle or handlebar stem (hidden inside the frame instead).

Due to the special properties of carbon and especially the super fabric of Toray 800/1000 it was even possible to abandon the standard triangular frame shape and make the absolute most of freedom of form.

Finally, a special thanks to Bob Vroegh from Bob Lab for the 3D Solid Works contribution!

Further info on the special website:

Two golden, one silver and one bronze medal on Rio Paralympics with M5 2-SPOKE wheel!

September 22nd, 2016To the top

And a new worldrecord on the 500 meter standing start as well for Alyda Norbruis (NL)

Two golden, one silver and one bronze medal on Rio Paralympics with M5 2-SPOKE wheel!M5 2-SPOKE wheels are used by the worlds fastest professional bicyclists and hand-bikers. Among them the current Olympic and world champion Triathlon 2016 Jetze Plat and many more professional cyclists like world champion and two times Olympic Gold medalist Alyda Norbruis (Rio 2016). Also the TEAM.NL tandem with Vincent ter Schure and Timo Fransen have used the 2-SPOKE in the 20 km time trial with a silver medal as result.

Especially the use of the wheel in the tandem proves the strength of the wheel.

Video: Alyda Norbruis in Women's Individual Pursuit - C 1-3: qualifying

Recent article and video in the newspaper PZC (in Dutch)

<< previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 
21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 
next >>
No rights or claims can be in any way derived from the information displayed on this page.© Copyright 2003 - 2017 M5 Recumbents / Vipers
M5 Lightweight bike parts
Carbon Specials
M5 Specials
Other products
Why an M5
Races and records
Minimal Bike
M5 Pro
Bram Moens
 Latest news